- Semi-automatic
- Direct induction sealer
- Packaging development
- PLC controlled operation
- Tailored to application
The MIT-2 operates semi-automatically and allows for the direct application of a foil to a container without the need for a cap using our capless induction sealing process. With the correct sealing head, it is possible to seal round, non-round, 3D or irregular shaped containers made from plastics, glass, metal or ceramic.
The Relco MIT-2 is a great starting point for any packaging development using an induction sealing process. This system allows users to accurately test the direct application of a foil to a container or other component with full control over all of the sealing parameters (induction welding time, induction power level, cooling time and sealing head pressure) without the need for expensive highly automated equipment. Since the MIT-2 is powered by the same induction generator (Relco P-800) as is used in our high speed automatic machinery, trials and development can be done in full confidence that the results will be replicated on commercialisation.
Once the development stage is over or if a higher output is needed, we have a comprehensive line-up of automatic capless induction sealers suited to a wide variety of applications and production lines. Our Punch&Seal and P800 units are suitable for integration into OEM filling/assembly equipment whilst the FCS range of machinery provides capless induction sealing capability to most conveyor fed linear indexing lines. Rotary and robotic sealers are also available for higher output lines.
Requirements | description |
---|---|
Mains Power | 220-240v a/c Single Phase (5A) |
Compressed Air | 1-7 Bar / 15-100 p.s.i. |
Components | description |
Pneumatics | 1x40mm bore SMC 50mm Stroke Head Cylinder |
SMC 10 Bar Max. Pressure Regulator | |
SMC 10 Bar Max. Pressure Gauge | |
Vacuum | SMC (ZH10B) Venturi Vacuum Generator |
Solenoids | SMC 24v DC Solenoid Valves |
PLC | Mitsubishi Fx1n |
HMI | GOT1020 |
Generators | Relco P800 (800W) solid state induction generator |
Sealing Heads | As required for application with internal vacuum pick & place device |
Safety | Independent 2-hand cycle start with interlock Emergency Stop Button |
Size & Weight | description |
Dimensions | Footprint 350mm x 350mm, Control Box 350mm x 350mm x 115mm |
Weight | 30Kg |